diff --git a/.github/workflows/doxygen-gh-pages.yml b/.github/workflows/doxygen-gh-pages.yml index bda0229c5..a1043e1d0 100644 --- a/.github/workflows/doxygen-gh-pages.yml +++ b/.github/workflows/doxygen-gh-pages.yml @@ -21,9 +21,15 @@ jobs: - name: configure run: cmake -B build -S . -DEXPATPP_BUILD_DOCS=ON - name: clean generated docs dir - run: rm -rf build/html - - name: build - run: cmake --build build --target doc + run: rm -rf site docs/reference + - name: clone dxygen theme + run: git clone https://github.com/CrowCpp/darxygen.git + - name: run doxygen + run: doxygen + - name: run mkdocs + run: mkdocs build + #- name: build + # run: cmake --build build --target doc - name: Deploy 🚀 uses: JamesIves/github-pages-deploy-action@v4 diff --git a/.gitignore b/.gitignore index 3f0b01099..427ff92f5 100644 --- a/.gitignore +++ b/.gitignore @@ -1,3 +1,5 @@ +darxygen/** +docs/reference/** # Compiled Object files *.slo *.lo diff --git a/Doxyfile b/Doxyfile index 9546becf1..f1860c009 100644 --- a/Doxyfile +++ b/Doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.17 +# Doxyfile 1.9.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -12,6 +12,16 @@ # For lists, items can also be appended using: # TAG += value [value, ...] # Values that contain spaces should be placed between quotes (\" \"). +# +# Note: +# +# Use doxygen to compare the used configuration file with the template +# configuration file: +# doxygen -x [configFile] +# Use doxygen to compare the used configuration file with the template +# configuration file without replacing the environment variables or CMake type +# replacement variables: +# doxygen -x_noenv [configFile] #--------------------------------------------------------------------------- # Project related configuration options @@ -60,16 +70,28 @@ PROJECT_LOGO = $(DRONE_BUILD_DIR)/logo55.png OUTPUT_DIRECTORY = -# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- -# directories (in 2 levels) under the output directory of each output format and -# will distribute the generated files over these directories. Enabling this +# If the CREATE_SUBDIRS tag is set to YES then doxygen will create up to 4096 +# sub-directories (in 2 levels) under the output directory of each output format +# and will distribute the generated files over these directories. Enabling this # option can be useful when feeding doxygen a huge amount of source files, where # putting all generated files in the same directory would otherwise causes -# performance problems for the file system. +# performance problems for the file system. Adapt CREATE_SUBDIRS_LEVEL to +# control the number of sub-directories. # The default value is: NO. CREATE_SUBDIRS = NO +# Controls the number of sub-directories that will be created when +# CREATE_SUBDIRS tag is set to YES. Level 0 represents 16 directories, and every +# level increment doubles the number of directories, resulting in 4096 +# directories at level 8 which is the default and also the maximum value. The +# sub-directories are organized in 2 levels, the first level always has a fixed +# number of 16 directories. +# Minimum value: 0, maximum value: 8, default value: 8. +# This tag requires that the tag CREATE_SUBDIRS is set to YES. + +CREATE_SUBDIRS_LEVEL = 8 + # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII # characters to appear in the names of generated files. If set to NO, non-ASCII # characters will be escaped, for example _xE3_x81_x84 will be used for Unicode @@ -81,26 +103,18 @@ ALLOW_UNICODE_NAMES = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, -# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), -# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, -# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), -# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, -# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, -# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, -# Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Bulgarian, +# Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, English +# (United States), Esperanto, Farsi (Persian), Finnish, French, German, Greek, +# Hindi, Hungarian, Indonesian, Italian, Japanese, Japanese-en (Japanese with +# English messages), Korean, Korean-en (Korean with English messages), Latvian, +# Lithuanian, Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, +# Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, +# Swedish, Turkish, Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English -# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all generated output in the proper direction. -# Possible values are: None, LTR, RTL and Context. -# The default value is: None. - -OUTPUT_TEXT_DIRECTION = None - # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -227,6 +241,14 @@ QT_AUTOBRIEF = NO MULTILINE_CPP_IS_BRIEF = NO +# By default Python docstrings are displayed as preformatted text and doxygen's +# special commands cannot be used. By setting PYTHON_DOCSTRING to NO the +# doxygen's special commands can be used and the contents of the docstring +# documentation blocks is shown as doxygen documentation. +# The default value is: YES. + +PYTHON_DOCSTRING = YES + # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the # documentation from any documented member that it re-implements. # The default value is: YES. @@ -250,16 +272,16 @@ TAB_SIZE = 2 # the documentation. An alias has the form: # name=value # For example adding -# "sideeffect=@par Side Effects:\n" +# "sideeffect=@par Side Effects:^^" # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading -# "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines (in the resulting output). You can put ^^ in the value part of an -# alias to insert a newline as if a physical newline was in the original file. -# When you need a literal { or } or , in the value part of an alias you have to -# escape them by means of a backslash (\), this can lead to conflicts with the -# commands \{ and \} for these it is advised to use the version @{ and @} or use -# a double escape (\\{ and \\}) +# "Side Effects:". Note that you cannot put \n's in the value part of an alias +# to insert newlines (in the resulting output). You can put ^^ in the value part +# of an alias to insert a newline as if a physical newline was in the original +# file. When you need a literal { or } or , in the value part of an alias you +# have to escape them by means of a backslash (\), this can lead to conflicts +# with the commands \{ and \} for these it is advised to use the version @{ and +# @} or use a double escape (\\{ and \\}) ALIASES = @@ -304,18 +326,21 @@ OPTIMIZE_OUTPUT_SLICE = NO # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, JavaScript, -# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, -# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# Csharp (C#), C, C++, Lex, D, PHP, md (Markdown), Objective-C, Python, Slice, +# VHDL, Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: # FortranFree, unknown formatted Fortran: Fortran. In the later case the parser # tries to guess whether the code is fixed or free formatted code, this is the -# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat -# .inc files as Fortran files (default is PHP), and .f files as C (default is -# Fortran), use: inc=Fortran f=C. +# default for Fortran type files). For instance to make doxygen treat .inc files +# as Fortran files (default is PHP), and .f files as C (default is Fortran), +# use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # # Note that for custom extensions you also need to set FILE_PATTERNS otherwise -# the files are not read by doxygen. +# the files are not read by doxygen. When specifying no_extension you should add +# * to the FILE_PATTERNS. +# +# Note see also the list of default file extension mappings. EXTENSION_MAPPING = @@ -449,6 +474,19 @@ TYPEDEF_HIDES_STRUCT = NO LOOKUP_CACHE_SIZE = 0 +# The NUM_PROC_THREADS specifies the number of threads doxygen is allowed to use +# during processing. When set to 0 doxygen will based this on the number of +# cores available in the system. You can set it explicitly to a value larger +# than 0 to get more control over the balance between CPU load and processing +# speed. At this moment only the input processing can be done using multiple +# threads. Since this is still an experimental feature the default is set to 1, +# which effectively disables parallel processing. Please report any issues you +# encounter. Generating dot graphs in parallel is controlled by the +# DOT_NUM_THREADS setting. +# Minimum value: 0, maximum value: 32, default value: 1. + +NUM_PROC_THREADS = 1 + #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- @@ -512,6 +550,13 @@ EXTRACT_LOCAL_METHODS = NO EXTRACT_ANON_NSPACES = NO +# If this flag is set to YES, the name of an unnamed parameter in a declaration +# will be determined by the corresponding definition. By default unnamed +# parameters remain unnamed in the output. +# The default value is: YES. + +RESOLVE_UNNAMED_PARAMS = YES + # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all # undocumented members inside documented classes or files. If set to NO these # members will be included in the various overviews, but no documentation @@ -523,7 +568,8 @@ HIDE_UNDOC_MEMBERS = NO # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all # undocumented classes that are normally visible in the class hierarchy. If set # to NO, these classes will be included in the various overviews. This option -# has no effect if EXTRACT_ALL is enabled. +# will also hide undocumented C++ concepts if enabled. This option has no effect +# if EXTRACT_ALL is enabled. # The default value is: NO. HIDE_UNDOC_CLASSES = NO @@ -549,12 +595,20 @@ HIDE_IN_BODY_DOCS = NO INTERNAL_DOCS = NO -# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file -# names in lower-case letters. If set to YES, upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# (including Cygwin) ands Mac users are advised to set this option to NO. -# The default value is: system dependent. +# With the correct setting of option CASE_SENSE_NAMES doxygen will better be +# able to match the capabilities of the underlying filesystem. In case the +# filesystem is case sensitive (i.e. it supports files in the same directory +# whose names only differ in casing), the option must be set to YES to properly +# deal with such files in case they appear in the input. For filesystems that +# are not case sensitive the option should be set to NO to properly deal with +# output files written for symbols that only differ in casing, such as for two +# classes, one named CLASS and the other named Class, and to also support +# references to files without having to specify the exact matching casing. On +# Windows (including Cygwin) and MacOS, users should typically set this option +# to NO, whereas on Linux or other Unix flavors it should typically be set to +# YES. +# Possible values are: SYSTEM, NO and YES. +# The default value is: SYSTEM. CASE_SENSE_NAMES = NO @@ -572,6 +626,12 @@ HIDE_SCOPE_NAMES = NO HIDE_COMPOUND_REFERENCE= NO +# If the SHOW_HEADERFILE tag is set to YES then the documentation for a class +# will show which file needs to be included to use the class. +# The default value is: YES. + +SHOW_HEADERFILE = YES + # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of # the files that are included by a file in the documentation of that file. # The default value is: YES. @@ -680,7 +740,7 @@ GENERATE_DEPRECATEDLIST= YES # sections, marked by \if ... \endif and \cond # ... \endcond blocks. -ENABLED_SECTIONS = +ENABLED_SECTIONS = # The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the # initial value of a variable or macro / define can have for it to appear in the @@ -729,7 +789,8 @@ FILE_VERSION_FILTER = # output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. You can # optionally specify a file name after the option, if omitted DoxygenLayout.xml -# will be used as the name of the layout file. +# will be used as the name of the layout file. See also section "Changing the +# layout of pages" for information. # # Note that if you run doxygen from a directory containing a file called # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE @@ -775,24 +836,43 @@ WARNINGS = YES WARN_IF_UNDOCUMENTED = YES # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some parameters -# in a documented function, or documenting parameters that don't exist or using -# markup commands wrongly. +# potential errors in the documentation, such as documenting some parameters in +# a documented function twice, or documenting parameters that don't exist or +# using markup commands wrongly. # The default value is: YES. WARN_IF_DOC_ERROR = YES +# If WARN_IF_INCOMPLETE_DOC is set to YES, doxygen will warn about incomplete +# function parameter documentation. If set to NO, doxygen will accept that some +# parameters have no documentation without warning. +# The default value is: YES. + +WARN_IF_INCOMPLETE_DOC = YES + # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return -# value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. If -# EXTRACT_ALL is set to YES then this flag will automatically be disabled. +# value. If set to NO, doxygen will only warn about wrong parameter +# documentation, but not about the absence of documentation. If EXTRACT_ALL is +# set to YES then this flag will automatically be disabled. See also +# WARN_IF_INCOMPLETE_DOC # The default value is: NO. WARN_NO_PARAMDOC = NO +# If WARN_IF_UNDOC_ENUM_VAL option is set to YES, doxygen will warn about +# undocumented enumeration values. If set to NO, doxygen will accept +# undocumented enumeration values. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: NO. + +WARN_IF_UNDOC_ENUM_VAL = NO + # If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when -# a warning is encountered. +# a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS +# then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but +# at the end of the doxygen process doxygen will return with a non-zero status. +# Possible values are: NO, YES and FAIL_ON_WARNINGS. # The default value is: NO. WARN_AS_ERROR = NO @@ -803,13 +883,27 @@ WARN_AS_ERROR = NO # and the warning text. Optionally the format may contain $version, which will # be replaced by the version of the file (if it could be obtained via # FILE_VERSION_FILTER) +# See also: WARN_LINE_FORMAT # The default value is: $file:$line: $text. WARN_FORMAT = "$file:$line: $text" +# In the $text part of the WARN_FORMAT command it is possible that a reference +# to a more specific place is given. To make it easier to jump to this place +# (outside of doxygen) the user can define a custom "cut" / "paste" string. +# Example: +# WARN_LINE_FORMAT = "'vi $file +$line'" +# See also: WARN_FORMAT +# The default value is: at line $line of file $file. + +WARN_LINE_FORMAT = "at line $line of file $file" + # The WARN_LOGFILE tag can be used to specify a file to which warning and error # messages should be written. If left blank the output is written to standard -# error (stderr). +# error (stderr). In case the file specified cannot be opened for writing the +# warning and error messages are written to standard error. When as file - is +# specified the warning and error messages are written to standard output +# (stdout). WARN_LOGFILE = @@ -823,17 +917,29 @@ WARN_LOGFILE = # spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. -INPUT = "$(DRONE_BUILD_DIR)/include" +INPUT = include +#"$(DRONE_BUILD_DIR)/include" # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: https://www.gnu.org/software/libiconv/) for the list of -# possible encodings. +# documentation (see: +# https://www.gnu.org/software/libiconv/) for the list of possible encodings. +# See also: INPUT_FILE_ENCODING # The default value is: UTF-8. INPUT_ENCODING = UTF-8 +# This tag can be used to specify the character encoding of the source files +# that doxygen parses The INPUT_FILE_ENCODING tag can be used to specify +# character encoding on a per file pattern basis. Doxygen will compare the file +# name with each pattern and apply the encoding instead of the default +# INPUT_ENCODING) if there is a match. The character encodings are a list of the +# form: pattern=encoding (like *.php=ISO-8859-1). See cfg_input_encoding +# "INPUT_ENCODING" for further information on supported encodings. + +INPUT_FILE_ENCODING = + # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and # *.h) to filter out the source-files in the directories. @@ -842,12 +948,14 @@ INPUT_ENCODING = UTF-8 # need to set EXTENSION_MAPPING for the extension otherwise the files are not # read by doxygen. # +# Note the list of default checked file patterns might differ from the list of +# default file extension mappings. +# # If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, # *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, -# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, -# *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C comment), -# *.doc (to be provided as doxygen C comment), *.txt (to be provided as doxygen -# C comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f, *.for, *.tcl, *.vhd, +# *.hh, *.hxx, *.hpp, *.h++, *.l, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, +# *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C +# comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd, # *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.c \ @@ -897,7 +1005,7 @@ EXCLUDE_PATTERNS = # (namespaces, classes, functions, etc.) that should be excluded from the # output. The symbol name can be a fully qualified name, a word, or if the # wildcard * is used, a substring. Examples: ANamespace, AClass, -# AClass::ANamespace, ANamespace::*Test +# ANamespace::AClass, ANamespace::*Test # # Note that the wildcards are matched against the file with absolute path, so to # exclude all test directories use the pattern */test/* @@ -945,6 +1053,11 @@ IMAGE_PATH = ./doc # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. # +# Note that doxygen will use the data processed and written to standard output +# for further processing, therefore nothing else, like debug statements or used +# commands (so in case of a Windows batch file always use @echo OFF), should be +# written to standard output. +# # Note that for custom extensions or not directly supported extensions you also # need to set EXTENSION_MAPPING for the extension otherwise the files are not # properly processed by doxygen. @@ -986,6 +1099,15 @@ FILTER_SOURCE_PATTERNS = USE_MDFILE_AS_MAINPAGE = README.md +# The Fortran standard specifies that for fixed formatted Fortran code all +# characters from position 72 are to be considered as comment. A common +# extension is to allow longer lines before the automatic comment starts. The +# setting FORTRAN_COMMENT_AFTER will also make it possible that longer lines can +# be processed before the automatic comment starts. +# Minimum value: 7, maximum value: 10000, default value: 72. + +FORTRAN_COMMENT_AFTER = 72 + #--------------------------------------------------------------------------- # Configuration options related to source browsing #--------------------------------------------------------------------------- @@ -1083,17 +1205,11 @@ VERBATIM_HEADERS = YES ALPHABETICAL_INDEX = NO -# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in -# which the alphabetical index list will be split. -# Minimum value: 1, maximum value: 20, default value: 5. -# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. - -COLS_IN_ALPHA_INDEX = 5 - -# In case all classes in a project start with a common prefix, all classes will -# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag -# can be used to specify a prefix (or a list of prefixes) that should be ignored -# while generating the index headers. +# The IGNORE_PREFIX tag can be used to specify a prefix (or a list of prefixes) +# that should be ignored while generating the index headers. The IGNORE_PREFIX +# tag works for classes, function and member names. The entity will be placed in +# the alphabetical list under the first letter of the entity name that remains +# after removing the prefix. # This tag requires that the tag ALPHABETICAL_INDEX is set to YES. IGNORE_PREFIX = @@ -1113,7 +1229,7 @@ GENERATE_HTML = YES # The default directory is: html. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_OUTPUT = site/reference +HTML_OUTPUT = docs/reference # The HTML_FILE_EXTENSION tag can be used to specify the file extension for each # generated HTML page (for example: .htm, .php, .asp). @@ -1140,7 +1256,7 @@ HTML_FILE_EXTENSION = .html # of the possible markers and block names see the documentation. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_HEADER = $(DRONE_BUILD_DIR)/code_docs/darxygen/html_header.html +HTML_HEADER = darxygen/html_header.html # The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each # generated HTML page. If the tag is left blank doxygen will generate a standard @@ -1150,7 +1266,7 @@ HTML_HEADER = $(DRONE_BUILD_DIR)/code_docs/darxygen/html_header.html # that doxygen normally uses. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_FOOTER = $(DRONE_BUILD_DIR)/code_docs/darxygen/html_footer.html +HTML_FOOTER = darxygen/html_footer.html # The HTML_STYLESHEET tag can be used to specify a user-defined cascading style # sheet that is used by each HTML page. It can be used to fine-tune the look of @@ -1172,11 +1288,16 @@ HTML_STYLESHEET = # Doxygen will copy the style sheet files to the output directory. # Note: The order of the extra style sheet files is of importance (e.g. the last # style sheet in the list overrules the setting of the previous ones in the -# list). For an example see the documentation. +# list). +# Note: Since the styling of scrollbars can currently not be overruled in +# Webkit/Chromium, the styling will be left out of the default doxygen.css if +# one or more extra stylesheets have been specified. So if scrollbar +# customization is desired it has to be added explicitly. For an example see the +# documentation. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_EXTRA_STYLESHEET = $(DRONE_BUILD_DIR)/code_docs/darxygen/custom.css \ - $(DRONE_BUILD_DIR)/code_docs/darxygen/custom_dark_theme.css +HTML_EXTRA_STYLESHEET = darxygen/custom.css \ + darxygen/custom_dark_theme.css # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note @@ -1188,9 +1309,22 @@ HTML_EXTRA_STYLESHEET = $(DRONE_BUILD_DIR)/code_docs/darxygen/custom.css \ HTML_EXTRA_FILES = +# The HTML_COLORSTYLE tag can be used to specify if the generated HTML output +# should be rendered with a dark or light theme. +# Possible values are: LIGHT always generate light mode output, DARK always +# generate dark mode output, AUTO_LIGHT automatically set the mode according to +# the user preference, use light mode if no preference is set (the default), +# AUTO_DARK automatically set the mode according to the user preference, use +# dark mode if no preference is set and TOGGLE allow to user to switch between +# light and dark mode via a button. +# The default value is: AUTO_LIGHT. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE = AUTO_LIGHT + # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to -# this color. Hue is specified as an angle on a colorwheel, see +# this color. Hue is specified as an angle on a color-wheel, see # https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. @@ -1200,7 +1334,7 @@ HTML_EXTRA_FILES = HTML_COLORSTYLE_HUE = 220 # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors -# in the HTML output. For a value of 0 the output will use grayscales only. A +# in the HTML output. For a value of 0 the output will use gray-scales only. A # value of 255 will produce the most vivid colors. # Minimum value: 0, maximum value: 255, default value: 100. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1261,10 +1395,11 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: https://developer.apple.com/xcode/), introduced with OSX -# 10.5 (Leopard). To create a documentation set, doxygen will generate a -# Makefile in the HTML output directory. Running make will produce the docset in -# that directory and running make install will install the docset in +# environment (see: +# https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To +# create a documentation set, doxygen will generate a Makefile in the HTML +# output directory. Running make will produce the docset in that directory and +# running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at # startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy # genXcode/_index.html for more information. @@ -1281,6 +1416,13 @@ GENERATE_DOCSET = NO DOCSET_FEEDNAME = "Doxygen generated docs" +# This tag determines the URL of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDURL = + # This tag specifies a string that should uniquely identify the documentation # set bundle. This should be a reverse domain-name style string, e.g. # com.mycompany.MyDocSet. Doxygen will append .docset to the name. @@ -1306,8 +1448,12 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on -# Windows. +# on Windows. In the beginning of 2021 Microsoft took the original page, with +# a.o. the download links, offline the HTML help workshop was already many years +# in maintenance mode). You can download the HTML help workshop from the web +# archives at Installation executable (see: +# http://web.archive.org/web/20160201063255/http://download.microsoft.com/downlo +# ad/0/A/9/0A939EF6-E31C-430F-A3DF-DFAE7960D564/htmlhelp.exe). # # The HTML Help Workshop contains a compiler that can convert all HTML output # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML @@ -1337,7 +1483,7 @@ CHM_FILE = HHC_LOCATION = # The GENERATE_CHI flag controls if a separate .chi index file is generated -# (YES) or that it should be included in the master .chm file (NO). +# (YES) or that it should be included in the main .chm file (NO). # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1382,7 +1528,8 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). +# (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1390,8 +1537,8 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- -# folders). +# Folders (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1399,16 +1546,16 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- -# filters). +# Filters (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- -# filters). +# Filters (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_CUST_FILTER_ATTRS = @@ -1420,9 +1567,9 @@ QHP_CUST_FILTER_ATTRS = QHP_SECT_FILTER_ATTRS = -# The QHG_LOCATION tag can be used to specify the location of Qt's -# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the -# generated .qhp file. +# The QHG_LOCATION tag can be used to specify the location (absolute path +# including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to +# run qhelpgenerator on the generated .qhp file. # This tag requires that the tag GENERATE_QHP is set to YES. QHG_LOCATION = @@ -1465,16 +1612,28 @@ DISABLE_INDEX = YES # to work a browser that supports JavaScript, DHTML, CSS and frames is required # (i.e. any modern browser). Windows users are probably better off using the # HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can -# further fine-tune the look of the index. As an example, the default style -# sheet generated by doxygen has an example that shows how to put an image at -# the root of the tree instead of the PROJECT_NAME. Since the tree basically has -# the same information as the tab index, you could consider setting -# DISABLE_INDEX to YES when enabling this option. +# further fine tune the look of the index (see "Fine-tuning the output"). As an +# example, the default style sheet generated by doxygen has an example that +# shows how to put an image at the root of the tree instead of the PROJECT_NAME. +# Since the tree basically has the same information as the tab index, you could +# consider setting DISABLE_INDEX to YES when enabling this option. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_TREEVIEW = YES +# When both GENERATE_TREEVIEW and DISABLE_INDEX are set to YES, then the +# FULL_SIDEBAR option determines if the side bar is limited to only the treeview +# area (value NO) or if it should extend to the full height of the window (value +# YES). Setting this to YES gives a layout similar to +# https://docs.readthedocs.io with more room for contents, but less room for the +# project logo, title, and description. If either GENERATE_TREEVIEW or +# DISABLE_INDEX is set to NO, this option has no effect. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FULL_SIDEBAR = NO + # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that # doxygen will group on one line in the generated HTML documentation. # @@ -1499,6 +1658,24 @@ TREEVIEW_WIDTH = 250 EXT_LINKS_IN_WINDOW = NO +# If the OBFUSCATE_EMAILS tag is set to YES, doxygen will obfuscate email +# addresses. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +OBFUSCATE_EMAILS = YES + +# If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg +# tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see +# https://inkscape.org) to generate formulas as SVG images instead of PNGs for +# the HTML output. These images will generally look nicer at scaled resolutions. +# Possible values are: png (the default) and svg (looks nicer but requires the +# pdf2svg or inkscape tool). +# The default value is: png. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FORMULA_FORMAT = png + # Use this tag to change the font size of LaTeX formulas included as images in # the HTML documentation. When you change the font size after a successful # doxygen run you need to manually remove any form_*.png images from the HTML @@ -1508,17 +1685,6 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANSPARENT tag to determine whether or not the images -# generated for formulas are transparent PNGs. Transparent PNGs are not -# supported properly for IE 6.0, but are supported on all modern browsers. -# -# Note that when changing this option you need to delete any form_*.png files in -# the HTML output directory before the changes have effect. -# The default value is: YES. -# This tag requires that the tag GENERATE_HTML is set to YES. - -FORMULA_TRANSPARENT = YES - # The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands # to create new LaTeX commands to be used in formulas as building blocks. See # the section "Including formulas" for details. @@ -1536,11 +1702,29 @@ FORMULA_MACROFILE = USE_MATHJAX = NO +# With MATHJAX_VERSION it is possible to specify the MathJax version to be used. +# Note that the different versions of MathJax have different requirements with +# regards to the different settings, so it is possible that also other MathJax +# settings have to be changed when switching between the different MathJax +# versions. +# Possible values are: MathJax_2 and MathJax_3. +# The default value is: MathJax_2. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_VERSION = MathJax_2 + # When MathJax is enabled you can set the default output format to be used for -# the MathJax output. See the MathJax site (see: -# http://docs.mathjax.org/en/latest/output.html) for more details. +# the MathJax output. For more details about the output format see MathJax +# version 2 (see: +# http://docs.mathjax.org/en/v2.7-latest/output.html) and MathJax version 3 +# (see: +# http://docs.mathjax.org/en/latest/web/components/output.html). # Possible values are: HTML-CSS (which is slower, but has the best -# compatibility), NativeMML (i.e. MathML) and SVG. +# compatibility. This is the name for Mathjax version 2, for MathJax version 3 +# this will be translated into chtml), NativeMML (i.e. MathML. Only supported +# for NathJax 2. For MathJax version 3 chtml will be used instead.), chtml (This +# is the name for Mathjax version 3, for MathJax version 2 this will be +# translated into HTML-CSS) and SVG. # The default value is: HTML-CSS. # This tag requires that the tag USE_MATHJAX is set to YES. @@ -1553,22 +1737,29 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from https://www.mathjax.org before deployment. -# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. +# MathJax from https://www.mathjax.org before deployment. The default value is: +# - in case of MathJax version 2: https://cdn.jsdelivr.net/npm/mathjax@2 +# - in case of MathJax version 3: https://cdn.jsdelivr.net/npm/mathjax@3 # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://www.mathjax.org/mathjax # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax # extension names that should be enabled during MathJax rendering. For example +# for MathJax version 2 (see +# https://docs.mathjax.org/en/v2.7-latest/tex.html#tex-and-latex-extensions): # MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# For example for MathJax version 3 (see +# http://docs.mathjax.org/en/latest/input/tex/extensions/index.html): +# MATHJAX_EXTENSIONS = ams # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_EXTENSIONS = # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces # of code that will be used on startup of the MathJax code. See the MathJax site -# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an +# (see: +# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an # example see the documentation. # This tag requires that the tag USE_MATHJAX is set to YES. @@ -1615,7 +1806,8 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: https://xapian.org/). +# Xapian (see: +# https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1628,8 +1820,9 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: https://xapian.org/). See the section "External Indexing and -# Searching" for details. +# Xapian (see: +# https://xapian.org/). See the section "External Indexing and Searching" for +# details. # This tag requires that the tag SEARCHENGINE is set to YES. SEARCHENGINE_URL = @@ -1738,29 +1931,31 @@ PAPER_TYPE = a4 EXTRA_PACKAGES = -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the -# generated LaTeX document. The header should contain everything until the first -# chapter. If it is left blank doxygen will generate a standard header. See -# section "Doxygen usage" for information on how to let doxygen write the -# default header to a separate file. +# The LATEX_HEADER tag can be used to specify a user-defined LaTeX header for +# the generated LaTeX document. The header should contain everything until the +# first chapter. If it is left blank doxygen will generate a standard header. It +# is highly recommended to start with a default header using +# doxygen -w latex new_header.tex new_footer.tex new_stylesheet.sty +# and then modify the file new_header.tex. See also section "Doxygen usage" for +# information on how to generate the default header that doxygen normally uses. # -# Note: Only use a user-defined header if you know what you are doing! The -# following commands have a special meaning inside the header: $title, -# $datetime, $date, $doxygenversion, $projectname, $projectnumber, -# $projectbrief, $projectlogo. Doxygen will replace $title with the empty -# string, for the replacement values of the other commands the user is referred -# to HTML_HEADER. +# Note: Only use a user-defined header if you know what you are doing! +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of doxygen. The following +# commands have a special meaning inside the header (and footer): For a +# description of the possible markers and block names see the documentation. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_HEADER = -# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the -# generated LaTeX document. The footer should contain everything after the last -# chapter. If it is left blank doxygen will generate a standard footer. See +# The LATEX_FOOTER tag can be used to specify a user-defined LaTeX footer for +# the generated LaTeX document. The footer should contain everything after the +# last chapter. If it is left blank doxygen will generate a standard footer. See # LATEX_HEADER for more information on how to generate a default footer and what -# special commands can be used inside the footer. -# -# Note: Only use a user-defined footer if you know what you are doing! +# special commands can be used inside the footer. See also section "Doxygen +# usage" for information on how to generate the default footer that doxygen +# normally uses. Note: Only use a user-defined footer if you know what you are +# doing! # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_FOOTER = @@ -1793,9 +1988,11 @@ LATEX_EXTRA_FILES = PDF_HYPERLINKS = YES -# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate -# the PDF file directly from the LaTeX files. Set this option to YES, to get a -# higher quality PDF documentation. +# If the USE_PDFLATEX tag is set to YES, doxygen will use the engine as +# specified with LATEX_CMD_NAME to generate the PDF file directly from the LaTeX +# files. Set this option to YES, to get a higher quality PDF documentation. +# +# See also section LATEX_CMD_NAME for selecting the engine. # The default value is: YES. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1803,8 +2000,7 @@ USE_PDFLATEX = YES # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode # command to the generated LaTeX files. This will instruct LaTeX to keep running -# if errors occur, instead of asking the user for help. This option is also used -# when generating formulas in HTML. +# if errors occur, instead of asking the user for help. # The default value is: NO. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1817,16 +2013,6 @@ LATEX_BATCHMODE = NO LATEX_HIDE_INDICES = NO -# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source -# code with syntax highlighting in the LaTeX output. -# -# Note that which sources are shown also depends on other settings such as -# SOURCE_BROWSER. -# The default value is: NO. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_SOURCE_CODE = NO - # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See # https://en.wikipedia.org/wiki/BibTeX and \cite for more info. @@ -1907,16 +2093,6 @@ RTF_STYLESHEET_FILE = RTF_EXTENSIONS_FILE = -# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code -# with syntax highlighting in the RTF output. -# -# Note that which sources are shown also depends on other settings such as -# SOURCE_BROWSER. -# The default value is: NO. -# This tag requires that the tag GENERATE_RTF is set to YES. - -RTF_SOURCE_CODE = NO - #--------------------------------------------------------------------------- # Configuration options related to the man page output #--------------------------------------------------------------------------- @@ -2013,15 +2189,6 @@ GENERATE_DOCBOOK = NO DOCBOOK_OUTPUT = docbook -# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the -# program listings (including syntax highlighting and cross-referencing -# information) to the DOCBOOK output. Note that enabling this will significantly -# increase the size of the DOCBOOK output. -# The default value is: NO. -# This tag requires that the tag GENERATE_DOCBOOK is set to YES. - -DOCBOOK_PROGRAMLISTING = NO - #--------------------------------------------------------------------------- # Configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -2108,7 +2275,8 @@ SEARCH_INCLUDES = YES # The INCLUDE_PATH tag can be used to specify one or more directories that # contain include files that are not input files but should be processed by the -# preprocessor. +# preprocessor. Note that the INCLUDE_PATH is not recursive, so the setting of +# RECURSIVE has no effect here. # This tag requires that the tag SEARCH_INCLUDES is set to YES. INCLUDE_PATH = @@ -2141,7 +2309,7 @@ PREDEFINED = CROW_ENABLE_SSL \ # definition found in the source code. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. -EXPAND_AS_DEFINED = +EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will # remove all references to function-like macros that are alone on a line, have @@ -2203,15 +2371,6 @@ EXTERNAL_PAGES = YES # Configuration options related to the dot tool #--------------------------------------------------------------------------- -# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram -# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to -# NO turns the diagrams off. Note that this option also works with HAVE_DOT -# disabled, but it is recommended to install and use dot, since it yields more -# powerful graphs. -# The default value is: YES. - -CLASS_DIAGRAMS = YES - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2244,35 +2403,50 @@ HAVE_DOT = NO DOT_NUM_THREADS = 0 -# When you want a differently looking font in the dot files that doxygen -# generates you can specify the font name using DOT_FONTNAME. You need to make -# sure dot is able to find the font, which can be done by putting it in a -# standard location or by setting the DOTFONTPATH environment variable or by -# setting DOT_FONTPATH to the directory containing the font. -# The default value is: Helvetica. +# DOT_COMMON_ATTR is common attributes for nodes, edges and labels of +# subgraphs. When you want a differently looking font in the dot files that +# doxygen generates you can specify fontname, fontcolor and fontsize attributes. +# For details please see Node, +# Edge and Graph Attributes specification You need to make sure dot is able +# to find the font, which can be done by putting it in a standard location or by +# setting the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the +# directory containing the font. Default graphviz fontsize is 14. +# The default value is: fontname=Helvetica,fontsize=10. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_FONTNAME = Helvetica +DOT_COMMON_ATTR = "fontname=Helvetica,fontsize=10" -# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of -# dot graphs. -# Minimum value: 4, maximum value: 24, default value: 10. +# DOT_EDGE_ATTR is concatenated with DOT_COMMON_ATTR. For elegant style you can +# add 'arrowhead=open, arrowtail=open, arrowsize=0.5'. Complete documentation about +# arrows shapes. +# The default value is: labelfontname=Helvetica,labelfontsize=10. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_FONTSIZE = 10 +DOT_EDGE_ATTR = "labelfontname=Helvetica,labelfontsize=10" -# By default doxygen will tell dot to use the default font as specified with -# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set -# the path where dot can find it using this tag. +# DOT_NODE_ATTR is concatenated with DOT_COMMON_ATTR. For view without boxes +# around nodes set 'shape=plain' or 'shape=plaintext' Shapes specification +# The default value is: shape=box,height=0.2,width=0.4. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_NODE_ATTR = "shape=box,height=0.2,width=0.4" + +# You can set the path where dot can find font specified with fontname in +# DOT_COMMON_ATTR and others dot attributes. # This tag requires that the tag HAVE_DOT is set to YES. DOT_FONTPATH = -# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for -# each documented class showing the direct and indirect inheritance relations. -# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO. +# If the CLASS_GRAPH tag is set to YES (or GRAPH) then doxygen will generate a +# graph for each documented class showing the direct and indirect inheritance +# relations. In case HAVE_DOT is set as well dot will be used to draw the graph, +# otherwise the built-in generator will be used. If the CLASS_GRAPH tag is set +# to TEXT the direct and indirect inheritance relations will be shown as texts / +# links. +# Possible values are: NO, YES, TEXT and GRAPH. # The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. CLASS_GRAPH = YES @@ -2286,7 +2460,8 @@ CLASS_GRAPH = YES COLLABORATION_GRAPH = YES # If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for -# groups, showing the direct groups dependencies. +# groups, showing the direct groups dependencies. See also the chapter Grouping +# in the manual. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2309,10 +2484,32 @@ UML_LOOK = NO # but if the number exceeds 15, the total amount of fields shown is limited to # 10. # Minimum value: 0, maximum value: 100, default value: 10. -# This tag requires that the tag HAVE_DOT is set to YES. +# This tag requires that the tag UML_LOOK is set to YES. UML_LIMIT_NUM_FIELDS = 10 +# If the DOT_UML_DETAILS tag is set to NO, doxygen will show attributes and +# methods without types and arguments in the UML graphs. If the DOT_UML_DETAILS +# tag is set to YES, doxygen will add type and arguments for attributes and +# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, doxygen +# will not generate fields with class member information in the UML graphs. The +# class diagrams will look similar to the default class diagrams but using UML +# notation for the relationships. +# Possible values are: NO, YES and NONE. +# The default value is: NO. +# This tag requires that the tag UML_LOOK is set to YES. + +DOT_UML_DETAILS = NO + +# The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of characters +# to display on a single line. If the actual line length exceeds this threshold +# significantly it will wrapped across multiple lines. Some heuristics are apply +# to avoid ugly line breaks. +# Minimum value: 0, maximum value: 1000, default value: 17. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_WRAP_THRESHOLD = 17 + # If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and # collaboration graphs will show the relations between templates and their # instances. @@ -2379,6 +2576,13 @@ GRAPHICAL_HIERARCHY = YES DIRECTORY_GRAPH = YES +# The DIR_GRAPH_MAX_DEPTH tag can be used to limit the maximum number of levels +# of child directories generated in directory dependency graphs by dot. +# Minimum value: 1, maximum value: 25, default value: 1. +# This tag requires that the tag DIRECTORY_GRAPH is set to YES. + +DIR_GRAPH_MAX_DEPTH = 1 + # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images # generated by dot. For an explanation of the image formats see the section # output formats in the documentation of the dot tool (Graphviz (see: @@ -2432,10 +2636,10 @@ MSCFILE_DIRS = DIAFILE_DIRS = # When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the -# path where java can find the plantuml.jar file. If left blank, it is assumed -# PlantUML is not used or called during a preprocessing step. Doxygen will -# generate a warning when it encounters a \startuml command in this case and -# will not generate output for the diagram. +# path where java can find the plantuml.jar file or to the filename of jar file +# to be used. If left blank, it is assumed PlantUML is not used or called during +# a preprocessing step. Doxygen will generate a warning when it encounters a +# \startuml command in this case and will not generate output for the diagram. PLANTUML_JAR_PATH = @@ -2473,18 +2677,6 @@ DOT_GRAPH_MAX_NODES = 50 MAX_DOT_GRAPH_DEPTH = 0 -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, because dot on Windows does not seem -# to support this out of the box. -# -# Warning: Depending on the platform used, enabling this option may lead to -# badly anti-aliased labels on the edges of a graph (i.e. they become hard to -# read). -# The default value is: NO. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_TRANSPARENT = NO - # Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output # files in one run (i.e. multiple -o and -T options on the command line). This # makes dot run faster, but since only newer versions of dot (>1.8.10) support @@ -2497,14 +2689,18 @@ DOT_MULTI_TARGETS = NO # If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page # explaining the meaning of the various boxes and arrows in the dot generated # graphs. +# Note: This tag requires that UML_LOOK isn't set, i.e. the doxygen internal +# graphical representation for inheritance and collaboration diagrams is used. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. GENERATE_LEGEND = YES -# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot +# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate # files that are used to generate the various graphs. +# +# Note: This setting is not only used for dot files but also for msc temporary +# files. # The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. DOT_CLEANUP = YES diff --git a/docs/guides/app.md b/docs/guides/app.md index e2118851c..8009abf45 100644 --- a/docs/guides/app.md +++ b/docs/guides/app.md @@ -35,4 +35,4 @@ app.bindaddr("192.168.1.2")

For more info on middlewares, check out [this page](../middleware).

-For more info on what functions are available to a Crow app, go [here](../../reference/classcrow_1_1_crow.html). +For more info on what functions are available to a Crow app, go [here](../reference/classcrow_1_1_crow.html). diff --git a/docs/guides/included-middleware.md b/docs/guides/included-middleware.md index a56cfb3c6..5fa060094 100644 --- a/docs/guides/included-middleware.md +++ b/docs/guides/included-middleware.md @@ -88,9 +88,9 @@ Examples: `examples/middlewares/example_cors.cpp` This middleware allows to set CORS policies by using `CORSHandler`. Once enabled, it will apply the default CORS rules globally. -The CORS rules can be modified by first getting the middleware via `#!cpp auto& cors = app.get_middleware();`. The rules can be set per URL prefix using `prefix()`, per blueprint using `blueprint()`, or globally via `global()`. These will return a `CORSRules` object which contains the actual rules for the prefix, blueprint, or application. For more details go [here](../../reference/structcrow_1_1_c_o_r_s_handler.html). +The CORS rules can be modified by first getting the middleware via `#!cpp auto& cors = app.get_middleware();`. The rules can be set per URL prefix using `prefix()`, per blueprint using `blueprint()`, or globally via `global()`. These will return a `CORSRules` object which contains the actual rules for the prefix, blueprint, or application. For more details go [here](../reference/structcrow_1_1_c_o_r_s_handler.html). -`CORSRules` can be modified using the methods `origin()`, `methods()`, `headers()`, `max_age()`, `allow_credentials()`, or `ignore()`. For more details on these methods and what default values they take go [here](../../reference/structcrow_1_1_c_o_r_s_rules.html). +`CORSRules` can be modified using the methods `origin()`, `methods()`, `headers()`, `max_age()`, `allow_credentials()`, or `ignore()`. For more details on these methods and what default values they take go [here](../reference/structcrow_1_1_c_o_r_s_rules.html). ```cpp auto& cors = app.get_middleware(); @@ -100,4 +100,4 @@ cors .methods("POST"_method, "GET"_method) .prefix("/cors") .origin("example.com"); -``` \ No newline at end of file +``` diff --git a/docs/guides/json.md b/docs/guides/json.md index fa75678b0..02444e89f 100644 --- a/docs/guides/json.md +++ b/docs/guides/json.md @@ -20,7 +20,7 @@ JSON read value, used for taking a JSON string and parsing it into `crow::json`. You can read individual items of the rvalue, but you cannot add items to it.
To do that, you need to convert it to a `wvalue`, which can be done by simply writing `#!cpp crow::json::wvalue wval (rval);` (assuming `rval` is your `rvalue`).

-For more info on read values go [here](../../reference/classcrow_1_1json_1_1rvalue.html).

+For more info on read values go [here](../reference/classcrow_1_1json_1_1rvalue.html).

## wvalue JSON write value, used for creating, editing and converting JSON to a string.

@@ -43,7 +43,7 @@ An object type `wvalue` uses `std::unordered_map` by default, if you want to hav A JSON `wvalue` can be returned directly inside a route handler, this will cause the `content-type` header to automatically be set to `Application/json` and the JSON value will be converted to string and placed in the response body. For more information go to [Routes](../routes).

-For more info on write values go [here](../../reference/classcrow_1_1json_1_1wvalue.html). +For more info on write values go [here](../reference/classcrow_1_1json_1_1wvalue.html). !!! note diff --git a/docs/guides/multipart.md b/docs/guides/multipart.md index ebc32b853..5761e6af2 100644 --- a/docs/guides/multipart.md +++ b/docs/guides/multipart.md @@ -29,4 +29,4 @@ Part headers are organized in a similar way to request and response headers, and The message's individual body parts can be accessed by name using `msg.get_part_by_name("part-name")`.

-For more info on Multipart messages, go [here](../../reference/namespacecrow_1_1multipart.html) +For more info on Multipart messages, go [here](../reference/namespacecrow_1_1multipart.html) diff --git a/docs/guides/query-string.md b/docs/guides/query-string.md index cb927c669..e9eb07274 100644 --- a/docs/guides/query-string.md +++ b/docs/guides/query-string.md @@ -36,4 +36,4 @@ Works the same as `get_dict` but removing the values from the query string. if your query string contains both a list and dictionary with the same key, it is best to use `pop_list` before either `get_dict` or `pop_dict`, since a map cannot contain more than one value per key, each item in the list will override the previous and only the last will remain with an empty key.

-For more information take a look [here](../../reference/classcrow_1_1query__string.html). +For more information take a look [here](../reference/classcrow_1_1query__string.html). diff --git a/docs/guides/routes.md b/docs/guides/routes.md index 40dc6ae71..95593e26b 100644 --- a/docs/guides/routes.md +++ b/docs/guides/routes.md @@ -88,7 +88,7 @@ You can also access the URL parameters in the handler using `#!cpp req.url_param parameters inside the body can be parsed using `#!cpp req.get_body_params();`. which is useful for requests of type `application/x-www-form-urlencoded`. Its format is similar to `url_params`. -For more information on `crow::request` go [here](../../reference/structcrow_1_1request.html).

+For more information on `crow::request` go [here](../reference/structcrow_1_1request.html).

### Response Crow also provides the ability to define a response in the parameters by using `#!cpp ([](crow::response& res){...})`.

@@ -97,7 +97,7 @@ Please note that in order to return a response defined as a parameter you'll nee Alternatively, you can define the response in the body and return it (`#!cpp ([](){return crow::response()})`).
-For more information on `crow::response` go [here](../../reference/structcrow_1_1response.html).

+For more information on `crow::response` go [here](../reference/structcrow_1_1response.html).

Crow defines the following status codes: ``` @@ -152,7 +152,7 @@ Crow defines the following status codes: ### Return statement A `crow::response` is very strictly tied to a route. If you can have something in a response constructor, you can return it in a handler.

The main return type is `std::string`, although you could also return a `crow::json::wvalue` or `crow::multipart::message` directly.

-For more information on the specific constructors for a `crow::response` go [here](../../reference/structcrow_1_1response.html). +For more information on the specific constructors for a `crow::response` go [here](../reference/structcrow_1_1response.html). ## Returning custom classes [:octicons-feed-tag-16: v0.3](https://github.com/CrowCpp/Crow/releases/v0.3) diff --git a/docs/guides/websockets.md b/docs/guides/websockets.md index dbc86bcba..b86778fd6 100644 --- a/docs/guides/websockets.md +++ b/docs/guides/websockets.md @@ -47,6 +47,6 @@ The maximum payload size that a connection accepts can be adjusted either global By default, This limit is disabled. To disable the global setting in specific routes, you only need to call `#!cpp CROW_WEBSOCKET_ROUTE(app, "/url").max_payload(UINT64_MAX)`. -For more info about websocket routes go [here](../../reference/classcrow_1_1_web_socket_rule.html). +For more info about websocket routes go [here](../reference/classcrow_1_1_web_socket_rule.html). -For more info about websocket connections go [here](../../reference/classcrow_1_1websocket_1_1_connection.html). +For more info about websocket connections go [here](../reference/classcrow_1_1websocket_1_1_connection.html).