* Bump etcd to v3.5.4-k3s1
* Fix issue with datastore corruption on cluster-reset
* Disable unnecessary components during cluster reset
Disable control-plane components and the tunnel setup during
cluster-reset, even when not doing a restore. This reduces the amount of
log clutter during cluster reset/restore, making any errors encountered
more obvious.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
This change allows to define two cluster CIDRs for compatibility with
Kubernetes dual-stuck, with an assumption that two CIDRs are usually
IPv4 and IPv6.
It does that by levearaging changes in out kube-router fork, with the
following downstream release:
https://github.com/k3s-io/kube-router/releases/tag/v1.3.2%2Bk3s
Signed-off-by: Michal Rostecki <vadorovsky@gmail.com>
Improve feedback when running secrets-encrypt commands on etcd-only nodes, and
allow etcd-only nodes to properly restart when effecting rotation.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Add etcd extra args support for K3s
Signed-off-by: Chris Kim <oats87g@gmail.com>
* Add etcd custom argument integration test
Signed-off-by: Chris Kim <oats87g@gmail.com>
* go generate
Signed-off-by: Chris Kim <oats87g@gmail.com>
Using MAINPID breaks systemd's exit detection, as it stops watching the
original pid, but is unable to watch the new pid as it is not a child
of systemd itself. The best we can do is just notify when execing the child
process.
We also need to consolidate forking into a sigle place so that we don't
end up with multiple levels of child processes if both redirecting log
output and reaping child processes.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Make sure there are no duplicates in etcd member list
Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
* fix node names with hyphens
Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
* use full server name for etcd node name
Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
Also honor node-ip when adding the node address to the SAN list, instead
of hardcoding the autodetected IP address.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Reset load balancer state during restoraion
Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
* Reset load balancer state during restoraion
Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
Sync DisableKubeProxy from cfg into control before sending control to clients,
as it may have been modified by a startup hook.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
the server's built-in helm controller.
Problem:
Testing installation and uninstallation of the Helm Controller on k3s is
not possible if the Helm Controller is baked into the k3s server.
Solution:
The Helm Controller can optionally be disabled, which will allow users
to manage its installation manually.
Signed-off-by: Joe Kralicky <joe.kralicky@suse.com>
* Move registries.yaml handling out to rancher/wharfie
* Add system-default-registry support
* Add CLI support for kubelet image credential providers
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Always use static ports for the load-balancers
This fixes an issue where RKE2 kube-proxy daemonset pods were failing to
communicate with the apiserver when RKE2 was restarted because the
load-balancer used a different port every time it started up.
This also changes the apiserver load-balancer port to be 1 below the
supervisor port instead of 1 above it. This makes the apiserver port
consistent at 6443 across servers and agents on RKE2.
Additional fixes below were required to successfully test and use this change
on etcd-only nodes.
* Actually add lb-server-port flag to CLI
* Fix nil pointer when starting server with --disable-etcd but no --server
* Don't try to use full URI as initial load-balancer endpoint
* Fix etcd load-balancer pool updates
* Update dynamiclistener to fix cert updates on etcd-only nodes
* Handle recursive initial server URL in load balancer
* Don't run the deploy controller on etcd-only nodes
