* Update to v1.28.2
Signed-off-by: Johnatas <johnatasr@hotmail.com>
* Bump containerd and stargz versions
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Print message on upgrade fail
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Send Bad Gateway instead of Service Unavailable when tunnel dial fails
Works around new handling for Service Unavailable by apiserver aggregation added in kubernetes/kubernetes#119870
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Add 60 seconds to server upgrade wait to account for delays in apiserver readiness
Also change cleanup helper to ensure upgrade test doesn't pollute the
images for the rest of the tests.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
---------
Signed-off-by: Johnatas <johnatasr@hotmail.com>
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Co-authored-by: Brad Davidson <brad.davidson@rancher.com>
k3s etcd-snapshot save --etcd-s3 ... is creating a local snapshot and uploading it to s3 while k3s etcd-snapshot delete --etcd-s3 ... was deleting the snapshot only on s3 buckets, this commit change the behavior of delete to do it locally and on s3
Signed-off-by: Ian Cardoso <osodracnai@gmail.com>
Wire up a node watch to collect addresses of server nodes, to prevent adding unauthorized SANs to the dynamiclistener cert.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Consolidate CopyFile function
Signed-off-by: Derek Nola <derek.nola@suse.com>
* Copy to File, not destination folder
Signed-off-by: Derek Nola <derek.nola@suse.com>
---------
Signed-off-by: Derek Nola <derek.nola@suse.com>
Only configure enable-aggregator-routing and egress-selector-config-file
if required by egress-selector-mode.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Problem:
When support for etcd was added in 3957142, generation of certificates and keys for etcd was not gated behind use of managed etcd.
Keys are generated and distributed across servers even if managed etcd is not enabled.
Solution:
Allow generation of certificates and keys only if managed etc is enabled. Check config.DisableETCD flag.
Signed-off-by: Bartossh <lenartconsulting@gmail.com>
Need to add a cli flag for this. Also, should probably have config file loading support for the certificate commands.
Signed-off-by: leilei.zhai <leilei.zhai@qingteng.cn>
* Shortcircuit search with help and version flag
Signed-off-by: Derek Nola <derek.nola@suse.com>
* Keep functions seperate
Signed-off-by: Derek Nola <derek.nola@suse.com>
---------
Signed-off-by: Derek Nola <derek.nola@suse.com>
Allows nodes to join the cluster during a webhook outage. This also
enhances auditability by creating Kubernetes events for the deferred
verification.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Move coverage writer into agent and server
* Add coverage report to E2E PR tests
* Add codecov upload to drone
Signed-off-by: Derek Nola <derek.nola@suse.com>
It is no way we can configure the lb image because it is a const value.
It would be better that we make it variable value and we can override
the value like the `helm-controller` job image when compiling k3s/rke2
Signed-off-by: Yuxing Deng <jxfa0043379@hotmail.com>
Only actual admin actions should use the admin kubeconfig; everything done by the supervisor/deploy/helm controllers will now use a distinct account for audit purposes.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
As per https://github.com/golang/go/issues/47001 even subtle.ConstantTimeCompare should never be used with variable-length inputs, as it will return 0 if the lengths do not match. Switch to consistently using constant-time comparisons of hashes for password checks to avoid any possible side-channel leaks that could be combined with other vectors to discover password lengths.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Also add bandwidth and firewall plugins. The bandwidth plugin is
automatically registered with the appropriate capability, but the
firewall plugin must be configured by the user if they want to use it.
Ref: https://www.cni.dev/plugins/current/meta/firewall/
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* local-storage: Fix permission
/var/lib/rancher/k3s/storage/ should be 700
/var/lib/rancher/k3s/storage/* should be 777
Fixes#2348
Signed-off-by: Boleyn Su <boleyn.su@gmail.com>
* Fix pod command field type
* Fix to int test
Signed-off-by: Derek Nola <derek.nola@suse.com>
---------
Signed-off-by: Boleyn Su <boleyn.su@gmail.com>
Signed-off-by: Derek Nola <derek.nola@suse.com>
Co-authored-by: Brad Davidson <brad@oatmail.org>
Co-authored-by: Derek Nola <derek.nola@suse.com>
* Add helper function for multiple arguments in stringslice
Signed-off-by: Derek Nola <derek.nola@suse.com>
* Cleanup server setup with util function
Signed-off-by: Derek Nola <derek.nola@suse.com>
Several places in the code used a 5-second retry loop to wait on
Runtime.Core to be set. This caused a race condition where OnChange
handlers could be added after the Wrangler shared informers were already
started. When this happened, the handlers were never called because the
shared informers they relied upon were not started.
Fix that by requiring anything that waits on Runtime.Core to run from a
cluster controller startup hook that is guaranteed to be called before
the shared informers are started, instead of just firing it off in a
goroutine that retries until it is set.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Don't set up the agent tunnel authorizer on agentless servers, and warn when agentless servers won't have a way to reach in-cluster endpoints.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Fixes an issue where CRDs were being created without schema, allowing
resources with invalid content to be created, later stalling the
controller ListWatch event channel when the invalid resources could not
be deserialized.
This also requires moving Addon GVK tracking from a status field to
an annotation, as the GroupVersionKind type has special handling
internal to Kubernetes that prevents it from being serialized to the CRD
when schema validation is enabled.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Bump go version to 1.20.3 to match upstream
* Bump cri-dockerd
* Bump golanci-lint
* go generate
* Bump selinux in cgroup test
* Bump to v1.27.1 tags
* Release documentation improvements
* Only run upgrade e2e test on PR
Signed-off-by: Derek Nola <derek.nola@suse.com>
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Co-authored-by: Brad Davidson <brad.davidson@rancher.com>
* Remove deprecated nodeSelector label beta.kubernetes.io/os
Problem:
The nodeSelector label beta.kubernetes.io/os in the CoreDNS deployment was deprecated in 1.14 and will likely be removed soon
Solution:
Change the nodeSelector to remove the beta
Signed-off-by: Dan Mills <evilhamsterman@gmail.com>
We need to send the full chain in order for cross-signing to work
properly during switchover to a new root.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* Wait for kubelet port to be ready before setting
* Wait for kubelet to update the Ready status before reading port
Signed-off-by: Daishan Peng <daishan@acorn.io>
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Co-authored-by: Brad Davidson <brad.davidson@rancher.com>
Turns out etcd-only nodes were never running **any** of the controllers,
so allowing multiple controllers didn't really fix things.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Prevents errors when starting with fail-closed webhooks
Also, use panic instead of Fatalf so that the CloudControllerManager rescue can handle the error
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Allow bootstrapping with kubeadm bootstrap token strings or existing
Kubelet certs. This allows agents to join the cluster using kubeadm
bootstrap tokens, as created with the `k3s token create` command.
When the token expires or is deleted, agents can successfully restart by
authenticating with their kubelet certificate via node authentication.
If the token is gone and the node is deleted from the cluster, node auth
will fail and they will be prevented from rejoining the cluster until
provided with a valid token.
Servers still must be bootstrapped with the static cluster token, as
they will need to know it to decrypt the bootstrap data.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
This command must be run on a server while the service is running. After this command completes, all the servers in the cluster should be restarted to load the new CA files.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
* General cleanup of test-helpers functions to address CI failures
* Install awscli in test image
* Log containerd output to file even when running with --debug
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
Also ensure that the snapshot job does not attempt to trigger multiple concurrent runs, as this is not supported.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
ServiceLB now requires this module, but it will not get autoloaded by the kubelet if the host is using nftables.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
