k3s/vendor/github.com/rootless-containers/rootlesskit

RootlessKit: the gate to the rootless world

RootlessKit is a kind of Linux-native "fake root" utility, made for mainly running Docker and Kubernetes as an unprivileged user, so as to protect the real root on the host from potential container-breakout attacks.

• What it actually does
• Projects using RootlessKit
• Setup
  • Requirements
    • Distribution-specific hints
• Usage
• State directory
• Environment variables
• Network Drivers
  • --net=host (default)
  • --net=slirp4netns (recommended)
  • --net=vpnkit
  • --net=lxc-user-nic (experimental)
• Port Drivers

What it actually does

RootlessKit creates user_namespaces(7) and mount_namespaces(7), and executes newuidmap(1)/newgidmap(1) along with subuid(5) and subgid(5).

RootlessKit also supports isolating network_namespaces(7) with userspace NAT using "slirp". Kernel NAT using SUID-enabled lxc-user-nic(1) is also experimentally supported.

Projects using RootlessKit

• Docker/Moby
• Usernetes: Docker & Kubernetes, installable under a non-root user's $HOME.
• k3s: Lightweight Kubernetes
• BuildKit: Next-generation docker build backend

Setup

$ go get github.com/rootless-containers/rootlesskit/cmd/rootlesskit
$ go get github.com/rootless-containers/rootlesskit/cmd/rootlessctl

or just run make to make binaries under ./bin directory.

Requirements

• newuidmap and newgidmap need to be installed on the host. These commands are provided by the uidmap package on most distributions.

• /etc/subuid and /etc/subgid should contain more than 65536 sub-IDs. e.g. penguin:231072:65536. These files are automatically configured on most distributions.

$ id -u
1001
$ whoami
penguin
$ grep "^$(whoami):" /etc/subuid
penguin:231072:65536
$ grep "^$(whoami):" /etc/subgid
penguin:231072:65536

Distribution-specific hints

Debian (excluding Ubuntu):

• sudo sh -c "echo 1 > /proc/sys/kernel/unprivileged_userns_clone" is required

Arch Linux:

• sudo sh -c "echo 1 > /proc/sys/kernel/unprivileged_userns_clone" is required

RHEL/CentOS 7:

• sudo sh -c "echo 28633 > /proc/sys/user/max_user_namespaces" is required
• COPR package vbatts/shadow-utils-newxidmap needs to be installed

Usage

Inside rootlesskit, your UID is mapped to 0 but it is not the real root:

$ rootlesskit bash
rootlesskit$ id
uid=0(root) gid=0(root) groups=0(root),65534(nogroup)
rootlesskit$ ls -l /etc/shadow
-rw-r----- 1 nobody nogroup 1050 Aug 21 19:02 /etc/shadow
rootlesskit$ $ cat /etc/shadow
cat: /etc/shadow: Permission denied

Environment variables are kept untouched:

$ rootlesskit bash
rootlesskit$ echo $USER
penguin
rootlesskit$ echo $HOME
/home/penguin
rootlesskit$ echo $XDG_RUNTIME_DIR
/run/user/1001

Filesystems can be isolated from the host with --copy-up:

$ rootlesskit --copy-up=/etc bash
rootlesskit$ rm /etc/resolv.conf
rootlesskit$ vi /etc/resolv.conf

You can even create network namespaces with Slirp:

$ rootlesskit --copy-up=/etc --copy-up=/run --net=slirp4netns --disable-host-loopback bash
rootlesskit$ ip netns add foo
...

Proc filesystem view:

$ rootlesskit bash
rootlesskit$ cat /proc/self/uid_map
         0       1001          1
         1     231072      65536
rootlesskit$ cat /proc/self/gid_map
         0       1001          1
         1     231072      65536
rootlesskit$ cat /proc/self/setgroups
allow

Full CLI options:

NAME:
   rootlesskit - the gate to the rootless world

USAGE:
   rootlesskit [global options] command [command options] [arguments...]

VERSION:
   0.3.0+dev

COMMANDS:
     help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --debug                      debug mode
   --state-dir value            state directory
   --net value                  network driver [host, slirp4netns, vpnkit, lxc-user-nic(experimental), vdeplug_slirp(deprecated)] (default: "host")
   --slirp4netns-binary value   path of slirp4netns binary for --net=slirp4netns (default: "slirp4netns")
   --vpnkit-binary value        path of VPNKit binary for --net=vpnkit (default: "vpnkit")
   --lxc-user-nic-binary value  path of lxc-user-nic binary for --net=lxc-user-nic (default: "/usr/lib/x86_64-linux-gnu/lxc/lxc-user-nic")
   --lxc-user-nic-bridge value  lxc-user-nic bridge name (default: "lxcbr0")
   --mtu value                  MTU for non-host network (default: 65520 for slirp4netns, 1500 for others) (default: 0)
   --cidr value                 CIDR for slirp4netns network (default: 10.0.2.0/24, requires slirp4netns v0.3.0+ for custom CIDR)
   --disable-host-loopback      prohibit connecting to 127.0.0.1:* on the host namespace
   --copy-up value              mount a filesystem and copy-up the contents. e.g. "--copy-up=/etc" (typically required for non-host network)
   --copy-up-mode value         copy-up mode [tmpfs+symlink] (default: "tmpfs+symlink")
   --port-driver value          port driver for non-host network. [none, socat, slirp4netns, builtin(experimental)] (default: "none")
   --help, -h                   show help
   --version, -v                print the version

State directory

The following files will be created in the state directory, which can be specified with --state-dir:

• lock: lock file
• child_pid: decimal PID text that can be used for nsenter(1).
• api.sock: REST API socket for rootlessctl. See Port Drivers section.

If --state-dir is not specified, RootlessKit creates a temporary state directory on /tmp and removes it on exit.

Undocumented files are subject to change.

Environment variables

The following environment variables will be set for the child process:

• ROOTLESSKIT_STATE_DIR (since v0.3.0): absolute path to the state dir

Undocumented environment variables are subject to change.

Network Drivers

RootlessKit provides several drivers for providing network connectivity:

• --net=host: use host network namespace (default)
• --net=slirp4netns: use slirp4netns (recommended)
• --net=vpnkit: use VPNKit
• --net=lxc-user-nic: use lxc-user-nic (experimental)
• --net=vdeplug_slirp: use vdeplug_slirp (deprecated)

Benchmark (Aug 28, 2018):

Implementation	MTU=1500	MTU=4000	MTU=16384	MTU=65520
(rootful veth)	(52.1 Gbps)	(45.4 Gbps)	(43.6 Gbps )	(51.5 Gbps)
rootlesskit --net=slirp4netns	1.07 Gbps	2.78 Gbps	4.55 Gbps	9.21 Gbps
rootlesskit --net=vpnKit	514 Mbps	526 Mbps	540 Mbps	(Unsupported)
rootlesskit --net=vdeplug_slirp	763 Mbps	(Unsupported)	(Unsupported)	(Unsupported)

--net=lxc-user-nic is as fast as rootful veth.

--net=host (default)

--net=host does not isolate the network namespace from the host.

Pros:

• No performance overhead
• Supports ICMP Echo (ping) when /proc/sys/net/ipv4/ping_group_range is configured

Cons:

• No permission for network-namespaced operations, e.g. creating iptables rules, running tcpdump

To route ICMP Echo packets (ping), you need to write the range of GIDs to net.ipv4.ping_group_range.

$ sudo sh -c "echo 0   2147483647  > /proc/sys/net/ipv4/ping_group_range"

--net=slirp4netns (recommended)

--net=slirp4netns isolates the network namespace from the host and launch slirp4netns for providing usermode networking.

Pros:

• Possible to perform network-namespaced operations, e.g. creating iptables rules, running tcpdump
• Supports ICMP Echo (ping) when /proc/sys/net/ipv4/ping_group_range is configured

Cons:

• Extra performance overhead (but still faster than --net=vpnkit)
• Supports only TCP, UDP, and ICMP Echo packets

To use --net=slirp4netns, you need to install slirp4netns. v0.3.0 or later is recommended.

$ sudo dnf install slirp4netns

or

$ sudo apt-get install slirp4netns

If binary package is not available for your distribution, install from the source:

$ git clone https://github.com/rootless-containers/slirp4netns
$ cd slirp4netns
$ ./autogen.sh && ./configure && make
$ cp slirp4netns ~/bin

The network is configured as follows by default:

• IP: 10.0.2.100/24
• Gateway: 10.0.2.2
• DNS: 10.0.2.3

The network configuration can be changed by specifying custom CIDR, e.g. --cidr=10.0.3.0/24 (requires slirp4netns v0.3.0+).

Specifying --copy-up=/etc is highly recommended unless /etc/resolv.conf on the host is statically configured. Otherwise /etc/resolv.conf in the RootlessKit's mount namespace will be unmounted when /etc/resolv.conf on the host is recreated, typically by NetworkManager or systemd-resolved.

It is also highly recommended to specyfy--disable-host-loopback. Otherwise ports listening on 127.0.0.1 in the host are accessible as 10.0.2.2 in the RootlessKit's network namespace.

Example session:

$ rootlesskit --net=slirp4netns --copy-up=/etc --disable-host-loopback bash
rootlesskit$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: tap0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 65520 qdisc fq_codel state UP group default qlen 1000
    link/ether 46:dc:8d:09:fd:f2 brd ff:ff:ff:ff:ff:ff
    inet 10.0.2.100/24 scope global tap0
       valid_lft forever preferred_lft forever
    inet6 fe80::44dc:8dff:fe09:fdf2/64 scope link
       valid_lft forever preferred_lft forever
ootlesskit$ ip r
default via 10.0.2.2 dev tap0
10.0.2.0/24 dev tap0 proto kernel scope link src 10.0.2.100
rootlesskit$ cat /etc/resolv.conf 
nameserver 10.0.2.3
rootlesskit$ curl https://www.google.com
<!doctype html><html ...>...</html>

--net=vpnkit

--net=vpnkit isolates the network namespace from the host and launch VPNKit for providing usermode networking.

Pros:

• Possible to perform network-namespaced operations, e.g. creating iptables rules, running tcpdump

Cons:

• Extra performance overhead
• Supports only TCP and UDP packets. No support for ICMP Echo (ping) unlike --net=slirp4netns, even if /proc/sys/net/ipv4/ping_group_range is configured.

To use --net=vpnkit, you need to install VPNkit.

$ git clone https://github.com/moby/vpnkit.git
$ cd vpnkit
$ make
$ cp vpnkit.exe ~/bin/vpnkit

The network is configured as follows by default:

• IP: 192.168.65.3/24
• Gateway: 192.168.65.1
• DNS: 192.168.65.1

As in --net=slirp4netns, specifying --copy-up=/etc and --disable-host-loopback is highly recommended. If --disable-host-loopback is not specified, ports listening on 127.0.0.1 in the host are accessible as 192.168.65.2 in the RootlessKit's network namespace.

--net=lxc-user-nic (experimental)

--net=lxc-user-nic isolates the network namespace from the host and launch lxc-user-nic(1) SUID binary for providing kernel-mode NAT.

Pros:

• No performance overhead
• Possible to perform network-namespaced operations, e.g. creating iptables rules, running tcpdump
• Supports ICMP Echo (ping) without /proc/sys/net/ipv4/ping_group_range configuration

Cons:

• Less secure
• Needs /etc/lxc/lxc-usernet configuration

To use lxc-user-nic, you need to install liblxc-common package:

$ sudo apt-get install liblxc-common

You also need to set up /etc/lxc/lxc-usernet:

# USERNAME TYPE BRIDGE COUNT
penguin    veth lxcbr0 1

The COUNT value needs to be increased to run multiple RootlessKit instances with --net=lxc-user-nic simultaneously.

It may take a few seconds to configure the interface using DHCP.

If you start and stop RootlessKit too frequently, you might use up all available DHCP addresses. You might need to reset /var/lib/misc/dnsmasq.lxcbr0.leases and restart the lxc-net service.

Currently, the MAC address is always set to a random address.

Port Drivers

rootlessctl can be used for exposing the ports in the network namespace to the host network namespace. You also need to launch rootlesskit with --port-driver=(socat|slirp4netns|builtin). builtin is the fastest but currently experimental.

For example, to expose 80 in the child as 8080 in the parent:

$ rootlesskit --state-dir=/run/user/1001/rootlesskit/foo --net=slirp4netns --disable-host-loopback --copy-up=/etc --port-driver=builtin bash
rootlesskit$ rootlessctl --socket=/run/user/1001/rootlesskit/foo/api.sock add-ports 0.0.0.0:8080:80/tcp
1
rootlesskit$ rootlessctl --socket=/run/user/1001/rootlesskit/foo/api.sock list-ports
ID    PROTO    PARENTIP   PARENTPORT    CHILDPORT    
1     tcp      0.0.0.0    8080          80
rootlesskit$ rootlessctl --socket=/run/user/1001/rootlesskit/foo/api.sock remove-ports 1
1

You can also expose ports using socat and nsenter instead of RootlessKit's port drivers.

$ pid=$(cat /run/user/1001/rootlesskit/foo/child_pid)
$ socat -t -- TCP-LISTEN:8080,reuseaddr,fork EXEC:"nsenter -U -n -t $pid socat -t -- STDIN TCP4\:127.0.0.1\:80"