synology webdav server

README.md

@@ -95,6 +95,7 @@ Additionally, the plugin author may occasionally visit Obsidian official forum a
 - Tutorials / Examples:
   - [ownCloud](./docs/remote_services/webdav_owncloud/README.md)
   - [InfiniCloud](./docs/remote_services/webdav_infinicloud_teracloud/README.md)
+  - [Synology webdav server](./docs/remote_services/webdav_synology_webdav_server/README.md) | [群晖 webdav server](./docs/remote_services/webdav_synology_webdav_server/README.zh-cn.md)
   - [AList](./docs/remote_services/webdav_alist/README.md)
   - [坚果云 JianGuoYun/NutStore](./docs/remote_services/webdav_jianguoyun/README.md)
 - Very old version of Obsidian needs [configuring CORS](./docs/remote_services/webdav_general/webav_cors.md).

docs/remote_services/webdav_synology_webdav_server/README.md

@@ -0,0 +1,55 @@
+# Synology Webdav Server
+
+English | [中文](./README.zh-cn.md)
+
+## Link
+
+<https://kb.synology.com/en-global/DSM/tutorial/How_to_access_files_on_Synology_NAS_with_WebDAV>
+
+## Attention
+
+The tutorial author (the author of Remotely Save) is NOT an expert of NAS / Synology. Please read the doc carefully and change it to accommodate your needs by yourself.
+
+**It's dangerous to expose your NAS into public Internet if you don't know how to set up firewalls and other protections.**
+
+## Steps
+
+Synology DSM 7 is used in this tutorial.
+
+1. Create a new shared folder if you don't have one. For this tutorial, a new shared folder `share2` is created. You should assing a proper user to read / write the shared folder.
+   ![](./synology_create_shared_folder.png)
+
+2. Assuming you want to sync your vault into sub folder `哈哈哈/sub folder`, please create the sub folder(s) correspondingly inide the shared folder `share2`.
+
+3. Install webdav server from package center.
+   ![](./synology_install_webdav_server.png)
+
+4. Enter the webdav server settings.
+
+5. If you know how to configure https certificates correctly, you are strongly recommend to enable https.
+
+   For the demonstration purpose, this tutorial enable http server for the later steps.
+
+   Also "Enable DavDepthInfinity", which could speed up the plugin runnings greatly.
+
+   "Apply".
+
+   ![](./synology_webdav_server_settings.png)
+
+6. In Remotely Save settings, you should input your address as:
+
+   `http(s)://<your synology ip or domain>/<shared folder>/<sub folders>`
+
+   For example, in the tutorial, the proper url should be:
+
+   `http://<ip>/share2/哈哈哈/sub folder`
+
+   Username and password should be the user you configured before with read / write permissions to `share2`.
+
+   Depth header should be "supports depth="infinity"".
+
+   Check connectivity!
+
+   ![](./synology_remotely_save_settings.png)
+
+7. Sync!

docs/remote_services/webdav_synology_webdav_server/README.zh-cn.md

@@ -0,0 +1,56 @@
+# 群晖 Webdav Server
+
+[English](./README.md) | 中文
+
+## 链接
+
+<https://kb.synology.cn/zh-cn/DSM/tutorial/How_to_access_files_on_Synology_NAS_with_WebDAV>
+
+## 注意
+
+教程作者（Remotely Save 作者）**不是** NAS、群晖专家。请仔细阅读文档，并自行改动以适应您自身需求。
+
+**没有设置防火墙和其他保护措施的话，将 NAS 暴露到公网上非常危险。**
+
+## 步骤
+
+本教程有用到群晖 DSM 7。
+
+1. 创建共享文件夹。本教程示例创建了 `share2`。你需要允许某个账号对此的读写权限。
+
+   ![](./synology_create_shared_folder.png)
+
+2. 假设之后你想同步你的库到子文件夹，`哈哈哈/sub folder`，请先在共享文件夹 `share2` 底下创建好。
+
+3. 从套件中心安装 webdav server 。
+   ![](./synology_install_webdav_server.png)
+
+4. 进入 webdav server 设置。
+
+5. 如果你知道如何正确配置 https 证书的话，强烈建议开启 https。
+
+   本教程简化示例，开启了 http。
+
+   也设置“Enable DavDepthInfinity”，这可以加速插件连接速度。
+
+   “Apply”。
+
+   ![](./synology_webdav_server_settings.png)
+
+6. 在 Remotely Save 设置页，你的地址应如下格式输入：
+
+   `http(s)://<your synology ip or domain>/<shared folder>/<sub folders>`
+
+   比如说，本教程里，正确的地址类似于：
+
+   `http://<ip>/share2/哈哈哈/sub folder`
+
+   用户名和密码是你之前配置了允许读写 `share2` 的那个账号。
+
+   Depth 设置应为“supports depth="infinity"”。
+
+   检查连接！
+
+   ![](./synology_remotely_save_settings.png)
+
+7. 同步！