Add button configuration logic

remote/config.h

@@ -0,0 +1,99 @@
+///////////////////////////////////////////////////////////////////////////////
+// Tyler Perkins
+// 29-03-22
+// Button configuration
+//
+
+#ifndef _CONFIG_H_
+#define _CONFIG_H_
+
+// Button configuration
+// Fill in with appropriate address and command
+///////////////////////////////////////
+// Per Rev 1.0, the button layout is as follows on the provided PCB
+// [10][  ][  ]
+// [07][08][09]
+// [04][05][06]
+// [01][02][03]
+//
+// BUTTON**_PIN is based on the hardware configutation, and is currently set to
+// the latest hardware iteration, rev 1.1
+//
+// BUTTON**_ADDR and BUTTON**_CMD are the NEC address and command respctivly.
+// They are used by the IRsend library. You will need to edit remote.ino if
+// your remote is not using NEC, however NEC is the very common
+//
+// NOTE: It is planned to make button 10 switch through several "virtual"
+// buttons, however this is a planned feature and not implemented
+
+///////////////////////////////////////
+// BUTTON 01
+// Prev song
+#define BUTTON01_PIN  10
+#define BUTTON01_ADDR 0x7080
+#define BUTTON01_CMD  0xAE
+
+///////////////////////////////////////
+// BUTTON 02
+// Next song
+#define BUTTON02_PIN  11
+#define BUTTON02_ADDR 0x7080
+#define BUTTON02_CMD  0xAF
+
+///////////////////////////////////////
+// BUTTON 03
+// Mute
+#define BUTTON03_PIN  12
+#define BUTTON03_ADDR 0x7080
+#define BUTTON03_CMD  0xB9
+
+///////////////////////////////////////
+// BUTTON 04
+// AUX input
+#define BUTTON04_PIN  13
+#define BUTTON04_ADDR 0x7080
+#define BUTTON04_CMD  0xB4
+
+///////////////////////////////////////
+// BUTTON 05
+// Bluetooth input
+#define BUTTON05_PIN  7
+#define BUTTON05_ADDR 0x7080
+#define BUTTON05_CMD  0xBA
+
+///////////////////////////////////////
+// BUTTON 06
+// RCA input
+#define BUTTON06_PIN  6
+#define BUTTON06_ADDR 0x7080
+#define BUTTON06_CMD  0xF9
+
+///////////////////////////////////////
+// BUTTON 07
+// VOL-
+#define BUTTON07_PIN  5
+#define BUTTON07_ADDR 0x7080
+#define BUTTON07_CMD  0xC8
+
+///////////////////////////////////////
+// BUTTON 08
+// 2.1/5.1 Toggle
+#define BUTTON08_PIN  4
+#define BUTTON08_ADDR 0x7080
+#define BUTTON08_CMD  0xEC
+
+///////////////////////////////////////
+// BUTTON 09
+// VOL+
+#define BUTTON09_PIN  8
+#define BUTTON09_ADDR 0x7080
+#define BUTTON09_CMD  0xC7
+
+///////////////////////////////////////
+// BUTTON 10
+// Power button
+#define BUTTON10_PIN  9
+#define BUTTON10_ADDR 0x7484
+#define BUTTON10_CMD  0xFF
+
+#endif //!_CONFIG_H_

remote/remote.ino

@@ -7,6 +7,8 @@
 #include <IRremote.h>
 #include "LowPower.h"
 
+#include "config.h"
+
 // IR library
 IRsend irsend;
 
@@ -16,13 +18,16 @@ void setup() {
     pinMode(2, INPUT);
 
     //buttons
-    pinMode(9, INPUT);
+    pinMode(BUTTON01_PIN, INPUT);
-    pinMode(10, INPUT);
+    pinMode(BUTTON02_PIN, INPUT);
-    pinMode(11, INPUT);
+    pinMode(BUTTON03_PIN, INPUT);
-
+    pinMode(BUTTON04_PIN, INPUT);
-    //pinMode(13, OUTPUT);
+    pinMode(BUTTON05_PIN, INPUT);
-
+    pinMode(BUTTON06_PIN, INPUT);
-    //attachInterrupt(digitalPinToInterrupt(2),readInput, RISING);
+    pinMode(BUTTON07_PIN, INPUT);
+    pinMode(BUTTON08_PIN, INPUT);
+    pinMode(BUTTON09_PIN, INPUT);
+    pinMode(BUTTON10_PIN, INPUT);
 
     irsend.begin(3, ENABLE_LED_FEEDBACK);
 }
@@ -36,15 +41,27 @@ void loop() {
 }
 
 void readInput(){
-    if(digitalRead(10) == HIGH){
+    if(digitalRead(BUTTON01_PIN) == HIGH){
-        //vol +
+        irsend.sendNEC(BUTTON01_ADDR, BUTTON01_CMD, 1);
-        irsend.sendNEC(0x7080, 0xC7, 1);
+    } else if(digitalRead(BUTTON02_PIN) == HIGH){
-    } else if(digitalRead(11) == HIGH){
+        irsend.sendNEC(BUTTON02_ADDR, BUTTON02_CMD, 1);
-        //vol -
+    } else if(digitalRead(BUTTON03_PIN) == HIGH){
-        irsend.sendNEC(0x7080, 0xC8, 1);
+        irsend.sendNEC(BUTTON03_ADDR, BUTTON03_CMD, 1);
-    } else if(digitalRead(9) == HIGH){
+    } else if(digitalRead(BUTTON04_PIN) == HIGH){
-        // 2.1/5.1
+        irsend.sendNEC(BUTTON04_ADDR, BUTTON04_CMD, 1);
-        irsend.sendNEC(0x7080, 0xEC, 1);
+    } else if(digitalRead(BUTTON05_PIN) == HIGH){
+        irsend.sendNEC(BUTTON05_ADDR, BUTTON05_CMD, 1);
+    } else if(digitalRead(BUTTON06_PIN) == HIGH){
+        irsend.sendNEC(BUTTON06_ADDR, BUTTON06_CMD, 1);
+    } else if(digitalRead(BUTTON07_PIN) == HIGH){
+        irsend.sendNEC(BUTTON07_ADDR, BUTTON07_CMD, 1);
+    } else if(digitalRead(BUTTON08_PIN) == HIGH){
+        irsend.sendNEC(BUTTON08_ADDR, BUTTON08_CMD, 1);
+    } else if(digitalRead(BUTTON09_PIN) == HIGH){
+        irsend.sendNEC(BUTTON09_ADDR, BUTTON09_CMD, 1);
+    } else if(digitalRead(BUTTON10_PIN) == HIGH){
+        irsend.sendNEC(BUTTON10_ADDR, BUTTON10_CMD, 1);
     }
+
     delay(25);
 }