diff --git a/tech/arduino_nano.wiki b/tech/arduino_nano.wiki
index 5254c83..a1d9dac 100644
--- a/tech/arduino_nano.wiki
+++ b/tech/arduino_nano.wiki
@@ -191,3 +191,15 @@ set when The input capture set by WGM to be used as the TOP value. Bits 2-0 are
 set when TCNT1 matches the value in OCR1B, OCR1A, when when TCNT1 overflows,
 respectivly.
 
+To make the clock useful, the following will be an example of how to use Timer
+1 to delay a certain amount of time. You will need the following information
+
+* CPU freq (16MHz)
+* Max timer value (0xFFFF or 65536)
+* Chosen Prescaler (See above for prescaler values)
+
+Divide the CPU freq by the chosen prescaler. Then divide that result through
+the desired freqency. Be sure that the value is smaller than the max timer
+value. If it is to large, choose a larger prescaler. Then place this in the
+OCR** Register and enable the desired interrupt.
+