Update for 17-01-22 15:30

This commit is contained in:
Tyler Perkins 2022-01-17 15:30:01 -05:00
parent f1968936a2
commit ddfaa08b69

View File

@ -10,7 +10,7 @@ See datasheet https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-7810-Automo
* ATMEL AVR ATmega328P microcontroller * ATMEL AVR ATmega328P microcontroller
* 8 bit @16Mhz * 8 bit @16Mhz
* 2Kbytes SRAM * 2Kbytes SRAM
* 32Kbytes flash * 32Kbytes flash
* 1Kbytes EEPROM * 1Kbytes EEPROM
* Three on board LED's * 20 IO pins * Three on board LED's * 20 IO pins
@ -324,3 +324,11 @@ Digital Input Disable Register 0 (DIDR0 0x7E). Bits 5-0 correspond to ADC5-0
pins (A5-A0 on the Nano). ADC7 and ADC6 do not have digital input pins, and pins (A5-A0 on the Nano). ADC7 and ADC6 do not have digital input pins, and
therefore do not need digital disable bits. therefore do not need digital disable bits.
=== Direct pinout ===
*THIS ONLY APPLIES WHEN USING AN ATMEGA328P ON ITS OWN*
The atmega328p can be setup on it own very easily. Connect
* Pin 7 to VCC
* Pin 8 to GND