= Slic3r =

Slic3r is a slicer application, generating [[gcode]] understood by 3D printers
from `.stl` files.

== Settings ==

* See [[PLA]]
* See [[ABS]]
* See [[TPU]]

== Purge routine ==

This routine draws a wipe line on the left side of the bed, helping purge some
filamnet from the previous print

{{{
; Filament gcode
;BEGIN CUSTOM GCODE
M117 Purge extruder
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
M117 By your command!
; End of custom start GCode
  }}}