27 lines
1.1 KiB
Plaintext
27 lines
1.1 KiB
Plaintext
= SWR =
|
|
|
|
Standing Wave Radio (SWR) is a phenomenon where power sent down a feed line is
|
|
reflected back by the antenna. Due to this, a standing wave is formed in the
|
|
feed line.
|
|
|
|
This only occours when the impedance of the antenna and the feed line do not
|
|
match. This is often caused by having the incorrect sized antenna for the
|
|
signal.
|
|
|
|
SWR is the same as the ratio of antenna-to-feed or feedline-to-antenna
|
|
impedances, whichever is greater than 1. No reflected power is a ratio of 1,
|
|
and means that there is no interference pattern. Because [[Impedance]] changes with
|
|
frequency, the SWR also changes with frequency.
|
|
|
|
Becuase of higher SWR means more reflected energy, a lower SWR means more of
|
|
the transmitters power actually makes it out through the antenna as a radio
|
|
wave. The power feeding back to the transmitter also creates interference with
|
|
the signal itself, which can cause voltages higher than what the transmitter is
|
|
designed for. Due to this *most equipment can only handle SWR of 2:1*.
|
|
|
|
If you expereince SWR, check
|
|
|
|
* Antenna length vs frequency
|
|
* Faulty feed lines/feed line connectors
|
|
* Erratic SWR means loose connections in feed line
|