40 lines
1.5 KiB
Plaintext
40 lines
1.5 KiB
Plaintext
= Impedance =
|
|
|
|
Ac voltage and current are often in phase, in something such as a resistor.
|
|
However, they can become out of phase when passing through a [[Capacitor]] or
|
|
[[Inductor]]. Capacitors are resistant to changes in voltage, causing voltage
|
|
and current to get out of sync. Inductors are resistant to chagnes in current,
|
|
causing voltage to get out of sync.
|
|
|
|
This getting out of sync is called reactance. The total reactance is called
|
|
Impedance. Impedance is measured in Ohms, shown as Z
|
|
|
|
== Inductors ==
|
|
|
|
An inductor creates a magnetic field, which when the direction of the voltage
|
|
switches, the field resists this change, creating a phase shift. This causes
|
|
some resistance, which is why impedance is measured in Ohms. The phase shift,
|
|
and therefore the resistance, is directly based on the frequency of the AC
|
|
signal. The relationship is shown below
|
|
|
|
X,,l,, = 2(pi)fL
|
|
|
|
Where X,,l,, is the inductive reactance (in Ohms),
|
|
f is AC signal frequency (in hz),
|
|
and L is the inductance (in henery)
|
|
|
|
*Inductors always make voltage lead current*
|
|
|
|
== Capacitors ==
|
|
|
|
A capacitor creates an electrostatic field, which swaps which plate of the
|
|
capacitor each charge forms on, when the direction changes. As a result, this
|
|
creates some resistance, measured in Ohms. The phase shift (in current) is
|
|
based on the frequency of the AC signal. The relationship is shown below
|
|
|
|
X,,c,, = 1 / 2(pi)fC
|
|
|
|
Where X,,c,, is the capactive reactance (in Ohms),
|
|
f is the AC signal frequency (in hz),
|
|
and C is the capacitance (in f)
|